Customization: | Available |
---|---|
Connection: | Flange |
Kind: | Corrugated Compensator |
Still deciding? Get samples of US$ 100/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Flange ends fabric rectangle expansion joint
The rectangular non-metallic compensator is a flexible component consisting of a composite non-metal mateiral,two pipes (or flanges) connected to adjacent pipeline and insulation materials.It is mainly used to compensate for the displacement caused by temperature, mechanical vibration, and foundation sinking in pipelines and equipment systems that transport micro-pressure dust gas, smoke, gas, and other gases.Pressure range:≤0.05 Mpa;Temperature range: low temperature type ≤200°C, high temperature type ≤ 800°C; Diameter range:Any sizes.
NO | ITEMS | MATERIALS | NO | ITEMS | MATERIALS |
1 | Long connection tube | Carbon steel | 7 | Filler | Carbon steel |
2 | Ring plate | Carbon steel | 8 | Steel wire | SS304 |
3&4 | Screw bolt/Nut | Carbon steel | 9 | Inner sleeve | SS304/Carbon steel |
5 | Gasket | Carbon steel | 10 | Press plate | Carbon steel |
6 | Astragal | Rubber composite | 11 | Short connection tube | Carbon steel |
Technique Parameter
Low Temperature Rectangular Fabric Expansion Joint
Design Pressure P=0.049Mpa Design Temperature T=200ºC
Pipeline Sectional Area | Axial Compensation |
Effective Area |
Flange | Total Length |
Max. Width |
||
m² | Axial | Lateral | cm² | Height | Size | mm | mm |
0.8 < aXb ≤ 2.5 | 40 | 8 | (a+20)(b+20) | 100 | 28 | 400 | a+400 |
80 | 11 | 500 | |||||
120 | 15 | 600 | |||||
2.5 < aXb ≤ 4.0 | 40 | 5 | (a+20)(b+20) | 100 | 28 | 400 | a+400 |
80 | 8 | 500 | |||||
120 | 11 | 600 | |||||
4.0 < aXb ≤ 6.0 | 40 | 4 | (a+30)(b+30) | 100 | 36 | 500 | a+500 |
80 | 6 | 600 | |||||
120 | 8 | 700 | |||||
6.0 < aXb ≤ 9.0 | 40 | 3 | (a+30)(b+30) | 100 | 36 | 500 | a+500 |
Low Temperature Rectangular Fabric Expansion Joint
Design Pressure P=0.049Mpa Design Temperature T=800ºC
Pipeline Sectional Area | Axial Compensation |
Effective Area |
Flange | Total Length |
Max. Width |
||
m² | Axial | Lateral | cm² | Height | Size | mm | mm |
0.8 < aXb ≤ 2.5 | 40 | 8 | (a+40)(b+40) | 100 | 28 | 400 | a+600 |
80 | 10 | 500 | |||||
120 | 12 | 600 | |||||
2.5 < aXb ≤ 4.0 | 40 | 5 | (a+40)(b+40) | 100 | 28 | 400 | a+600 |
80 | 8 | 500 | |||||
120 | 10 | 600 | |||||
4.0 < aXb ≤ 6.0 | 40 | 4 | (a+50)(b+50) | 100 | 36 | 500 | a+700 |
80 | 6 | 600 | |||||
120 | 8 | 700 | |||||
6.0 < aXb ≤ 9.0 | 40 | 3 | (a+50)(b+50) | 100 | 36 | 500 | a+700 |
80 | 4 | 600 | |||||
120 | 5 | 700 |
Fabric Rectangular Expansion Joint Application
• Gas turbine exhaust pipeline
• Desulfurization system
• Flue gas duct and exhaust system for kinds of industries
• Coal fired boiler, circulating fluidized bed boiler and exhaust-heat boiler for flue gas duct
Factory Corner