Flange Ductile Cast Steel Rubber Bellows Expansion Flexible Joint for Pipe

• Connection: Flange
• Kind: Corrugated Compensator
• Type: Axial
• Head Code: Round
• Material: Rubber Joint
• Surface Treatment: Galvanized
• Model NO.: JDG
• Customized: Customized
• Warranty: 24 Months
• Application: Chemical
• Color: Customized
• Product Name: Flange Ductile Cast Steel Rubber Bellows Expansion
• Transport Package: Plywooden Case
• Specification: 1" - 48"
• Trademark: Fly
• Origin: Zhejiang Province, China
• HS Code: 7307990000

Product Description

Flange ductile cast steel rubber bellows expansion flexible joint for pipe

FEATURES

• Applicable for suction and delivery (discharge).
• Provides sound and vibration isolation.
• Gaskets and packing are not required.
• Floating flanges allow for easy installation.
• Prevents piping system and equipment breakdown by absorbing elongation and contraction caused by temperature variances.
• Absorbs water pulsation and minimizes water hammering.

OPERATING CONDITIONS

Size Range	1-1/2" - 12"	14" - 24"
Operating Pressure	up to 214 psi	up to 114 psi
Operating Temp. Range*	14-170 F (Neoprene) 14-210 F (EPDM)	14-170 F (Neoprene) 14-210 F (EPDM)
Burst Pressure	853 psi	340 psi
Vacuum Rating*	Contact API Sales	Contact API Sales

* - Warnings:
a. Pressure ratings listed in the above table are for up to 110 Degrees F (for Neoprene), and 125  Degrees F (for EPDM). For elevated temperature service, please contact API Sales for actual working pressure ratings.
b. Limit rods are required in systems that are unanchored and recommended in all other applications.

MATERIALS

Part	Part Description	Material
1	Flanges	Stainless Steel
2	Reinforcing Wire	Mild Steel Strands
3	Tube	Synthetic Rubber
4	Cover	Synthetic Rubber
5	Reinforcing Fabric	Synthetic Fiber

APPLICATIONS

• Pumps & air compressors in air conditioning system & sanitary equipment.
• Refrigeration systems and blowers in industrial plant equipment.
• Feed-water and drainage equipment in marine piping systems.
• Applicable for use in power generation and chemical plants.
• Marine applications

Note: Customized for flanges ANSI-150, ANSI-300 and DIN

Technical parameters

 

Model Item	JGD-1	JGD-2	JGD-3
Working pressure Mpa (kgf/cm^2)	1.0(10)	1.6 (16)	2.5 (25)
Explosion pressure Mpa (kgf/cm^2)	2.0 (20)	3.0 (30)	4.5 (45)
Vacuum Kpa (mm/Hg)	53.3 (400)	86.7 (650)	100 (750)
Applicable Temperature ºC	-15ºC-115ºC(-30ºC-250ºC under special conditions)
Applicable media	Air,compressed air,water,sea water,oil,acid,alkali,and so on

 

Main data

Nominal Diameter DN		Length Lmm	Flange thickness bmm	Bolts Qty n	Diameter of bolt hole domm	Central diameter of bolt hole D1mm	Axial displacement mm		Horizontal displacement mm	Angular deflection (a1+a2)
mm	Inch						Extension	Compression
32	1.25	95	16	4	18	100	6	9	9	15
40	1.5	95	18	4	18	110	6	10	9	15
50	2	105	18	4	18	125	7	10	10	15
65	2.5	115	20	4	18	145	7	13	11	15
80	3	135	20	4	18	160	8	15	12	15
100	4	150	22	8	18	180	10	19	13	15
125	5	165	24	8	18	210	12	19	13	15
150	6	180	24	8	23	240	12	20	14	15
200	8	210	24	8	23	295	16	25	22	15
250	10	230	26	12	23	350	16	25	22	15
300	12	245	28	12	23	400	16	25	22	15
350	14	255	28	16	23	460	16	25	22	15
400	16	255	30	16	25	515	16	25	22	15
450	18	255	30	20	25	565	16	25	22	15
500	20	255	32	20	25	620	6	25	22	15
600	24	260	36	20	30	725	6	25	22	15
700	28	260	36	24	30	840	16	25	22	15
800	32	260	38	24	34	950	16	25	22	15
900	36	260	42	28	34	1050	6	25	22	15
1000	40	260	44	28	34	1160	18	26	24	15
1200	48	260	48	32	41	1380	18	26	24	15
1400	56	350	44	36	34	1560	20	28	26	15
1600	64	350	46	40	34	1760	25	35	30	10

1. Flange    
2. Rubber Layer  
3. Rubber Impregnated Fabric and Tire Cord
4. Steel Ring

High quality single sphere flange rubber expansion joint/ rubber flexible dadpter

1. All  rubber expansion joints are finshed with retaining flanges, limit rod units are available on special request.
2. Pressures shows are recommended"operating", test pressure is 1.5time"operating", burst pressure is 3 time"operating".
3. Vacuum rating is based on neutral installed length without external load. Products shall not be installed "elongated"on vacuum applications.
4. Do not weld near the expansion joints or weld the steel flanges to the piping after the expansion joints are installed. This will either burn or seriously damage the expansion joints. Huayuan Product Specifications in this catalogues for reference only. Huayuan reserve the right to change design construction, specification and materials without prior notice and without incuring any obligation. Any precise measurements, kindly contact with Huayuan technical service directly. 

Factory Corner

FAQ
Q. Are you a trading company or a manufacturer?
A: We are a manufacturer as you can see our workshop as above.

Q. What is your payment term?
A:Normally T/T 30% in advance, balance to be paid before delivery.

Q: What is your main market?
A:North America,Greenland,South America,Africa,Southeast Assia, Former Soviet Republics ,East Assia,and Europe.
Q: Can I place sample order to your factory?
A: Yes, Samples can be provided.

Q:What kind of trade terms can you do?
A:EX-WORKS,FOB,CFR,CIF,etc.

Q: How long is your delivery time?
A: Generally it is 5-7 days if the goods are in stock. Or it is 15-20 days if the goods are not in stock, it is accordijng to quantity.